Oct 02 2012

Signal Desktop 1.1Download  - Crack Key For U

Thank you for installing this update of NOVA. Metrohm 800 Dosino, with serial number 9128, called Analyte (defined in the Liquid. Handling Setup). It is important to verify the binaries you download by following one of these guides: dashcore-0.17.0.3-i686-pc-linux-gnu.tar.gz 39.4 MB. In unit test use openssl set security level to allow keys in test. Fix static analysis warnings about localzone locks that are unused.

watch the thematic video

[Windows] MEID iCloud bypass with Sim Fix Mina MEID Activator v1.1 / SIM / FaceTime/notifications

Signal Desktop 1.1Download - Crack Key For U -

10.8 macOS Mojave

1.    Communications processor CP 5613 FO, CP 5613 A2, CP 5614 A2, CP 5603, CP 5623, CP 5624

Readme file for the "SIMATIC NET PC Software V8.1" DVD with important information on the products

 

The following table lists your SIMATIC NET PC product with the corresponding software components (setup modules):

 

During the installation of your SIMATIC NET product (at the bottom), select the software components listed on the right from the DVD.

SIMATIC NET, PC Software, V8.1

SIMATIC NCM PC V5.5 + SP1 (service pack 1)

Industrial Ethernet

 

 

IE HARDNET S7
(Previous name: S7-1613)

Yes

Yes

IE S7-REDCONNECT

Yes

 -

IE Power Pack S7-REDCONNECT

Yes

 -

IE SOFTNET S7

Yes

Yes

IE SOFTNET S7 Lean

Yes

Yes

IE SOFTNET PG

Yes

 -

IE S7 OPC REDUNDANCY

 Yes

Yes 

 

 

 

SNMP OPC Server

 

 

SNMP OPC Server Basic

Yes

Yes

SNMP OPC Server Extended

Yes

Yes

SNMP OPC Server Power Pack

Yes

Yes

 

 

 

PROFINET

 

 

SOFTNET PN IO

Yes

Yes

 

 

 

PROFIBUS

 

 

PB SOFTNET
(Previous name: S7-5613)

Yes

Yes

PB SOFTNET
(Previous name: DP-5613)

Yes

Yes

PB SOFTNET S7

Yes

Yes

PB SOFTNET DP

Yes

Yes

PB SOFTNET  DP Slave

Yes

Yes

CP 5613 / CP 5614 Software
(DP-Base Programming Interface) *)

Yes

Yes

PB OPC REDUNDANCY

Yes

Yes

 

*) Delivered along with CP 5603, CP 5613A2, CP 5614A2, CP 5623 and CP 5624. High-Speed DP-Master access. incl. FDL, PG.

 

 

C79000-S8976-C016-14-0, © Siemens AG 2011

This file contains important information on the products of the
"SIMATIC NET PC Software V8.1" DVD.

 

During installation, select the "Automation License Manager" software component if your product includes a license key.

 

When using the "SIMATIC NET PC Software", make sure there are adequate system resources for their application. The resources required and the equipment of the PC station must be suitable for your application/configuration limits. General instructions from Microsoft regarding memory use and CPU load should be kept in mind.

If system resources are no longer available, error-free operation of the "SIMATIC NET PC Software" cannot be guaranteed.

 

The "SIMATIC NET PC Software V8.1" DVD has been released for operation:

·         with Windows 7 (Professional, Enterprise, Ultimate), 32-bit and 64-bit

·         with Windows Server 2008 R2

 

If you operate a PCS 7 system, we recommend that you do not install the SIMATIC NET DVD since the software is already included in the PCS 7 products.

 

The "SIMATIC NET PC Software V8.1" DVD replaces the "SIMATIC NET PC Software V8.0" and "SIMATIC NET PC Software V8.0 + SP1".

 

Before installing the SIMATIC NET DVD, please read the installation instructions “installation_en.pdf” on the SIMATIC NET DVD in the “\doc” subfolder. To be able to open this file, you require a PDF reader (for example Adobe Acrobat Reader). You can download this reader from "http://www.adobe.com/de/products/reader.html" and install it.

 

Please read the section relevant to your product carefully. If there are other sections that are important for a product, this will be pointed out in the product sections themselves.

 

The SIMATIC NET products are available on different data media:

·         On the DVD "SIMATIC NET, PC Software".

·         Service packs and hotfixes are available as downloads from the Internet:

-          SIMATIC NET PC Software

-          SIMATIC NCM PC

Link for German: http://support.automation.siemens.com/WW/view/de/4000024

Link for English: http://support.automation.siemens.com/WW/view/en/4000024

 

All authorizations (licenses) that you have for previous products (V8.0 or older) must be replaced. To do this, use our upgrade products with upgrade license keys.

 

You will find further SIMATIC NET documents on the accompanying DVD "SIMATIC NET Manual Collection".
You will also find SIMATIC NET documents on the Internet:
http://support.automation.siemens.com/ -> section “Self-help”, enter the “product name”; Reaction: In the search area “Manuals/BA” you will see a list of documents.

 

Readme file for SIMATIC NCM PC

Please read the notes in the readme file for the "SIMATIC NCM PC" product on the "SIMATIC NET PC Software" DVD in \sw\ncm_pc\disk1.

 

 

 

Contents

 

1.Communications processor CP 5613 FO, CP 5613 A2, CP 5614 A2, CP 5603, CP 5623, CP 5624

2.PROFIBUS HARDNET DP

3.PROFIBUS HARDNET S7

4.FMS-5613

5.The CP 5512 communications processor

6.The communications processor CP 5611 A2/CP 5621

7.The CP 5711 communications processor

8.PROFIBUS SOFTNET S7

9.PROFIBUS SOFTNET DP

10.PROFIBUS SOFTNET DP slave

11.CP 1613 A2 communications processor

12.CP 1623 communications processor

13.Industrial Ethernet HARDNET S7

14.TF-1613

15.S7-REDCONNECT and S7-REDCONNECT upgrade

16.The CP 1612 and CP 1612 A2 communications processor

17.Industrial Ethernet SOFTNET PN IO

18.Industrial Ethernet SOFTNET S7

19.Industrial Ethernet SOFTNET S7 Lean

20.Industrial Ethernet SOFTNET PG

21.PN OPC Server

22.IE/PB S7-OPC Redundancy

23.SNMP OPC Server

24.General requirements, notes, and restrictions

25.Information, restrictions and notes relating to OPC

26.Notes on license keys

27.Requirements and restrictions relating to hardware in general

28.Notes on C programming interfaces

29.Notes on project engineering, configuration and NCM

30.Development environments and compilers supported

31.Routing

32.Operating systems

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Where the CP 5613 is referred to below, this relates to the communications processors CP 5613 FO, CP 5603, CP 5613 A2, CP 5623, CP 5614 A2, CP 5624 unless specific types are named explicitly. CP 5613 (without A2) and CP 5614 FO are no longer supported.

 

Where the CP 5614 is referred to below, this relates to the communications processor types CP 5614 FO, CP 5614 A2, CP 5624; unless specific types are named explicitly. CP 5614 (without A2) and CP 5614 FO are no longer supported.

 

 

1.1        Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported (not the CP 5613 FO and CP 5614 FO)

V8.0

·       Windows 7, 32 Bit is supported

 

 

1.2        GSD file handling for the slave submodule CP 5614/CP 5613 A2/CP 5623 and CP 5603

 

For information on using the device master file (GSD), refer to the FAQ under entry ID 21687843 on the pages of SIEMENS Customer Support http://support.automation.siemens.com/WW/view/en/21687843.

 

 

1.3        Restrictions

 

Restriction for constant bus cycle time for CP 5623 and CP 5624

The DP_cycle_time function is not supported by the SIMATIC NET DVD V8.1.

 

Interface parameter setting "Auto"

Operation of the CP 5613 with the "Auto" interface parameter setting has not been released.

  

Do not uninstall/deactivate the CP

Configured CPs must not be uninstalled/deactivated.

If you use the WinAC software product, the CPs must never be deactivated.

 

Hot plugging

The communications processors CP 5613 and CP 5614 are not released for hot plugging.

 

Do not modify user-specific parameter assignment data in the GSD file

User-specific parameter assignment data in the GSD file should not be modified when operating along with to FDL.

 

Rack PC 840 V2 with CP 5613 A2/CP 5614 A2 with product versions 1 and 2

The communications processors CP 5613 A2/CP 5614 A2 with product versions 1 and 2 may be operated in the rack PC 840 V2 only in the PCI slots 5, 6 and 8.
This restriction no longer applies as of product version 3.

 

Expanded addressing with DPC2

Subnet addressing is not supported in DPC2.

 

Receiving bus parameters

Receiving bus parameters is supported only by the "Set PG/PC Interface" program.

 

PLC direct

The PLC direct functionality using an MPI cable is not supported.

 

Hyperthreading

Operation with activated hyperthreading has not been released for the CP 5613 FO. Disable hyperthreading, multicore and multi-CPU functions (for example in the BIOS) to operate the CP 5613 FO.

 

 

1.4        Notes on project engineering and configuration

 

Configuring the CP 5613/CP 5614 as a slave

The CP 5614 A2/CP 5624 are configured as slaves using GSD files. If necessary, you can orient yourself on sample files for the CP 5613/CP 5614, that are copied to "<Installation folder>\SIMATIC.NET\DP\DEMO_GSD" when you install software. You can import these files in SIMATIC STEP 7/NCM PC and change their configuration accordingly. If you require the Ident number of the slave, you can take this from the relevant GSD file. Refer to Section 1.2 for related information.

 

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

Link German: http://support.automation.siemens.com/WW/view/de/15227599

Link English: http://support.automation.siemens.com/WW/view/en/15227599

In this document, the information on FMS is not valid.

 

Bus parameters

Please note that when operating in PG mode, there is a reset with restart in the "Set PG/PC Interface" or "Configuration Console" program if bus parameters are modified.

 

 

1.5        Notes on the "Programming Interface DP-Base for CP 5613/CP 5614" manual

 

Access point for the Transfer sample program for CP 5614

The Transfer sample program for the CP 5614 always uses access point "CP_L2_1:"

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Where the CP 5613 and CP 5614 are referred to below, this relates to the communications processors CP 5603, CP 5613 A2, CP 5613 FO, CP 5623, CP 5614 A2, CP 5624; unless specific types are named explicitly.

 

 

2.1        Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

2.2        Restrictions

 

Communication partners

The DP master of the CP 5613 can be operated with certified DP slaves. With non-certified partners such as S7 slaves, the full range of functions is not guaranteed in all cases.

The DP slave of the CP 5614 A2 can be operated with certified DP master stations.

 

Parallel operation between a DP OPC server and a DP Base user program (C/C++) is not permitted

The DP OPC server uses the powerful DP‑Base interface for communication.
It can therefore not be used at the same time by a C user program. One effect of the double usage is that the "DP_get_pointer( )" function call returns a timeout error when used simultaneously with the DP OPC server.

 

DPC2 transport calls are not supported

DPC2 transport calls are not supported by the CP 5613/CP 5614.

 

Further restrictions

For information on the following topics, refer to Section 1.3, "Restrictions":

·         Interface parameter setting "Auto"

·         Hot plugging

·         Rack-PC 840 V2with CP 5613 A2/CP 5614 A2

·         Receiving bus parameters

·         Hyperthreading

 

Restrictions to the CP 5613 as DP slave

A CP 5603 / CP 5613 A2 / CP 5623 communications processor operating as a DP slave can only establish one connection using the DPC2 protocol and can therefore only communicate with one (1) DP master. DPC2 connection jobs from other class 2 masters are rejected with a communications error. Reading I/O data and slave diagnostics data is possible without any restrictions.

 

2.3         Notes on project engineering and configuration

 

Further information

For more detailed information, refer to Section 1.4, "Notes on project engineering and configuration":

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Where the CP 5613 is referred to below, this relates to the communications processors CP 5613 FO, CP 5613 A2, CP 5614 A2 unless specific types are named explicitly.

 

3.1        Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

3.2        Restrictions

 

S7 programming interface: return values of the "s7_receive" function

When evaluating the return values of the "s7_receive" function, if unexpected values occur, the "s7_discard_msg" function must be called in the default branch of the corresponding switch instruction.

 

Further information

For information on the following topics, refer to Section 1.3, "Restrictions":

·         Interface parameter setting "Auto"

·         Installation of the SIMATIC NET DVD

·         Hot plugging

·         Receiving bus parameters

·         Hyperthreading

 

 

3.3        Notes on project engineering and configuration

 

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

·       Link German: http://support.automation.siemens.com/WW/view/de/15227599

·       Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

CP 5613 as MPI interface

If you use a CP 5613 as MPI interface, make sure that the PROFIBUS profile is enabled automatically if no further access point is mapped on the MPI profile. This occurs, for example, when S7ONLINE was the only access point for the CP 5613, is mapped from "CP5613_5614(MPI)" to "PC internal (local)" and you want to continue using the CP 5613 as MPI interface.

 

Information on configuration

If connection establishment of a fully configured connection is started by a station that has a different station address from the configured station, the connection between the two partners will be established despite the difference.

 

Further information

For more detailed information, refer to Section 1.4, „Notes on project engineering and configuration“:

 

 

 

 

The FMS communications protocol is no longer supported by this SIMATIC NET software.

 

 

 

 

 

Please read the Installation Instructions/product information supplied in paper form with the CP 5512.

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

5.1     Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64-bit and Windows Server 2008 R2 are supported (not CP 5613 FO and CP 5614 FO)

V8.0

·       Windows 7, 32 Bit is supported

 

5.2         Restrictions

 

Configured mode

The CP 5512 is not released for configured mode!

 

Support

The CP 5512 can only be used with 32-bit operating systems. It is no longer supported in 64-bit operating systems.

 

 

 

 

Please read the Installation Instructions supplied in paper form with the CP 5611 A2/CP 5621.

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

6.1        Restrictions

  

Expanded addressing with DPC2

Subnet addressing is not supported in DPC2.

 

Restricted release

When using the communications processors CP 5611 A2 and CP 5621 in multi core or multiprocessor systems, operation in PROFIBUS networks up to a maximum of 1.5 Mbps is released. If higher baud rates are used, problems will be encountered on the bus during operation.

 

 

6.2        Notes on project engineering and configuration

 

Properties page in the Station configuration Editor

In the properties page of the Station configuration Editor, only fixed PROFIBUS bus profiles can be created for node initialization.

User-specific bus parameters for large network spans and networks such as redundant OLM rings can be specified with the "SIMATIC STEP 7/NCM PC" software tool.

 

The CP 5611 A2 is no longer detected

If a CP 5611 A2 communications processor is no longer detected by the SIMATIC environment after inserting it in a different PCI slot, all the CPs of the type CP 5611 A2 will have to be uninstalled in the "Device Manager" under SIMATIC NET.

Afterwards start the "Find New Hardware" in the Device Manager and follow the instructions of the operating system.

 

 

 

Please read the Installation Instructions/product information supplied in paper form with the CP 5711.

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

7.1        Restrictions

 

Number of supported CP 5711 modules:
One CP 5711 per PC is supported.

Expanded addressing with DPC2

Subnet addressing is not supported in DPC2.

 

Properties page in the Station configuration Editor

In the properties page of the Station configuration Editor, only fixed PROFIBUS bus profiles can be created for node initialization.

User-specific bus parameters for large network spans and networks such as redundant OLM rings can be specified with the "SIMATIC STEP 7/NCM PC" tool.

 

Restrictions configuring S7 connections

All communications modules of a PC must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work.

 

S7 programming interface: return values of the "s7_receive" function

When evaluating the return values of the "s7_receive" function, if unexpected values occur, the "s7_discard_msg" function must be called in the default branch of the corresponding switch instruction.

 

Error: Remote downloading of a configuration via a CP 5711 with SIMATIC STEP 7 / NCM PC is not possible.

 

Cause:

The CP 5711 was removed in configured mode and then reinserted (not permitted!)

 

Remedy:

a) Delete and then add the CP 5711 again in the Station Configuration Editor

b) Reconfigure the PC station

 

The CP 5711 is no longer visible in the PG/PC panel

If the CP 5711 is configured and the computer changes to the sleep state with the PG/PC panel open, the module is no longer visible in the PG/PC panel after exiting sleep state. This will only be recognized when the PG/PC panel is closed and reopened.

 

Remedy, To make the module visible again in the PG/PC panel:
Restart the computer or remove and reinsert the USB cable of the module.

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

8.1        Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

8.2        Restrictions

 

No parallel operation

Operating several PROFIBUS SOFTNET CPs in one computer is not supported unless the second CP is used solely for configuration purposes with STEP 7.

The parallel operation of several protocols via PROFIBUS SOFTNET CPs is not supported.

 

Properties page in the Station configuration Editor

In the properties page of the Station configuration Editor, only fixed PROFIBUS bus profiles can be created for node initialization.

User-specific bus parameters for large network spans and networks such as redundant OLM rings can be specified with the "SIMATIC STEP 7/NCM PC " tool.

  

Communications processors CP 5411, CP 5511 and CP 5611

The communications processors CP 5411, CP 5511 and CP 5611 (all without the A2 suffix) are no longer supported by the SIMATIC NET software.

 

Restrictions configuring S7 connections

All communications modules of a PC must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work.

 

S7 programming interface: return values of the "s7_receive" function

When evaluating the return values of the "s7_receive" function, if unexpected values occur, the "s7_discard_msg" function must be called in the default branch of the corresponding switch instruction.

 

 

8.3        Notes on project engineering and configuration

Module cannot be started in the Station Configuration Editor

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

·          Link German: http://support.automation.siemens.com/WW/view/de/15227599

·          Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

Message "CP 5611 A2 is no longer detected"

For information on the problem "CP 5611 A2 is no longer detected", refer to Section 6.2, "Notes on project engineering and configuration".

 

Further information on configuration

If connection establishment of a fully configured connection is started by a station that has a different station address from the configured station, the connection between the two partners will be established despite the difference.

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

9.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

9.2    Restrictions

 

No parallel operation

Operating several PROFIBUS SOFTNET CPs in one computer is not supported unless the second CP is used solely for configuration purposes with STEP 7.

The parallel operation of several protocols via PROFIBUS SOFTNET CPs is not supported.

 

Communications processors CP 5411, CP 5511 and CP 5611

The communications processors CP 5411, CP 5511 and CP 5611 (all without the A2 suffix) are no longer supported by the SIMATIC NET software.

 

DPC2 transport call is not supported

DPC2 transport calls are not supported.

 

 

9.3    Notes on project engineering and configuration

 

Module cannot be started in the Station Configuration Editor

 

Properties page in the Station configuration Editor

In the properties page of the Station configuration Editor, only fixed PROFIBUS bus profiles can be created for node initialization.

User-specific bus parameters for large network spans and networks such as redundant OLM rings can be specified with the "SIMATIC STEP 7/NCM PC " tool.

 

Message "CP 5611 is no longer detected"

For information on the problem "CP 5611 is no longer detected", refer to Section 6.2, "Notes on project engineering and configuration".

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

10.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

10.2    Restrictions

 

No parallel operation

Operating several PROFIBUS SOFTNET CPs in one computer is not supported unless the second CP is used solely for configuration purposes with STEP 7.

The parallel operation of several protocols via PROFIBUS SOFTNET CPs is not supported.

 

Communications processors CP 5411, CP 5511 and CP 5611

The communications processors CP 5411, CP 5511 and CP 5611 (all without the A2 suffix) are no longer supported by the SIMATIC NET software.

 

10.3    Notes on project engineering and configuration

 

Module cannot be started in the Station Configuration Editor

 

Properties page in the Station configuration Editor

In the properties page of the Station configuration Editor, only fixed PROFIBUS bus profiles can be created for node initialization.

User-specific bus parameters for large network spans and networks such as redundant OLM rings can be specified with the "SIMATIC STEP 7/NCM PC" software tool.

 

Active / passive slave

The CP 5611 A2 and CP 5621 modules can be operated as “active slave” (a special form of slave that is also PROFIBUS master at the same time).

With an active slave, the values are set in the configuration or in "Set PG/PC Interface".

If the bus parameters for an active slave are set using "Set PG/PC Interface", make sure that the bus parameters of the master and slave match.

 

Message "CP 5611 is no longer detected"

For information on the problem "CP 5611 is no longer detected", refer to Section 6.2, "Notes on project engineering and configuration".

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Where the CP 1613 A2 is named below, this relates only to this CP; a CP 1613 (without the A2 suffix) is no longer supported.

 

As of the "SIMATIC NET PC Software Edition 2007" CD, the two drivers for the CP 1613 (for industrial communication and for office/NDIS access) have been replaced by a common driver. This is displayed in the Device Manager under Network adapters.

 

 

11.1    Restrictions

 

Not with Industrial Ethernet SOFTNET

It is not possible to operate Industrial Ethernet SOFTNET protocols over the CP 1613 A2.

  

Uninstalling / deactivating CPs using the "Device Manager"

Configured CPs must not be uninstalled/deactivated using the "Device Manager".

If you use the WinAC software product, the CPs must never be deactivated.

 

Deactivating protocols

The protocols TCP/IP and ISO must be deactivated since they are necessary for configured operation!

 

Downloading the Firmware

Using a CP 1613 A2, no firmware can be downloaded to a CP 1616 or to S7 CPs.

 

 

11.2    Notes on commissioning

 

Current driver disk (exclusive PC network operation)

Please compare the version of the driver disk / driver DVD of your SIMATIC NET Ethernet software products with the versions on the SIMATIC NET DVD (sw\Driverdisk folder). If this is newer, please create a new driver disk / CD by copying the content of the folder (sw\Driverdisk) to an empty CD and then use this as the driver disk.

 

Two TCP/IP addresses

On the CP 1613 A2, you can set two IP addresses during configuration; the reason for this is as follows:

On the one hand, the CP 1613 A2 can also be used for automation purposes with the SIEMENS industrial protocols (SEND/RECEIVE, SAPI-S7). The protocols can either be handled over the transport protocol ISO or TCP/IP. Both transport protocols run in the firmware of the CP 1613. The interfacing of the TCP/IP transport protocol to the SIEMENS industrial protocol is according to the RFC 1006 specification.

On the other hand, the CP 1613 A2 communications processor is intended for operation with office communications protocols, for example TCP/IP. The office communications protocols run on the PC.

 

This means that a total of two TCP/IP transport protocol functions can be operated on the CP 1613 A2 at the same time:

·          Office communications interfacing

·          Interfacing SIEMENS industrial protocols

Both interfaces must be assigned different TCP/IP addresses to identify them uniquely.

 

The IP address for the automation protocols via ISO-on-TCP (synonymous with TCP/IP (RFC 1006)) must be different from the NDIS IP address for communication over PC networks.

 

MAC addresses

After installing a new CP 1613 A2 module, you should always compare its active MAC address with the MAC addresses of other CP 1613 A2 modules or other Ethernet modules. Make sure that all the Ethernet modules operated in the same network have different MAC addresses.

If the CP 1613 A2 installed in the computer is replaced by another CP 1613 A2 in the same slot, the new CP 1613 A2 will be assigned the MAC address of the CP 1613 A2 that was removed from the computer.

Even if the module is taken out of configured mode, it retains the MAC address. If you do not want the module in the network any more, change the MAC address or uninstall the CP.

Follow the steps below:

1.       After it has been taken out of the Station configuration Editor (out of configured mode), select the relevant module and uninstall it.

2.       Then restart your computer.

 

Time-of-day frames

When configuring the time intervals with STEP 7, only intervals of 1 s or 10 s are possible.

 

CP 1613 A2 is displayed in the device manager as "Ethernet Controller"

Select the relevant module and uninstall it. Then restart your computer.

 

Driver signature is not recognized

Sporadically, the signature of the CP 1613 driver is not recognized.

If this occurs, confirm the warning from the operating system with "Yes" to install the driver.

 

Passive connection establishment with the CP 1613 A2

If connections are established to the CP 1613 A2, the connection establishment timeout should not be set too low (for example with 64 connections, higher than 8000 ms).

 

Disabling the NDIS interface

The NDIS interface of the CP 1613 A2 must not be disabled. The linked protocols may only be removed if the CP 1613 is not in configured mode.

 

Using the firmware trace with more than one module

When you enable the firmware trace, ensure that the name of the trace file is different for each CP1613 A2.

 

 

11.3    Notes on project engineering and configuration

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

·         Link German: http://support.automation.siemens.com/WW/view/de/15227599

·         Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Update of a SIMATIC NET CD/DVD

An update of a SIMATIC NET CD/DVD using a driver CD after consultation with Customer Support is permitted.

 

 

12.1    Restrictions

 

General

The restrictions to the CP 1613 A2 listed in Section 11.1 also apply to the CP 1623.

 

XDB import with more than one CP 1623 installed

If more than one CP 1623 is installed in the computer, importing a configuration in the Station configuration Editor (XDB import) is possible only when the set addresses of the CP 1623 communications processor were adapted to the configuration previously in the "Configuration Console“.

If only the MAC addresses were configured, only the MAC addresses need to be set.

If only the IP addresses were configured, only the IP addresses need to be set.

If MAC and IP addresses were configured, both must be set.

 

Configuration in mixed operation CP 1613 A2/CP 1623

If the CP 1613 A2 and CP 1623 are used at the same time in one computer and you want to assign the configuration of a CP 1613 A2 to a CP 1623, the module assignment must be adapted in SIMATIC STEP7/NCM PC.

The module assignment is made in the "HW Config"/"PC Config" program in the object properties of the module, "Assignment" tab. The interface of the CP 1623 you want to configure must be entered there in the input boxes of the interface parameter assignment used.

This must be adapted for every CP 1623 that is to receive the configuration of a CP 1613 A2.

 

Port diagnostics over SNMP

Only the diagnostics of port 1 can be queried via SNMP.

 

Restriction for XDB import

Please note that an XDB import can only be made when the Station configuration Editor shows that >all< components can be replaced by compatible components.

 

 

12.2    Notes on commissioning

 

Current driver diskette (exclusive PC network operation)

Please compare the version of the driver disk / driver DVD of your SIMATIC NET Ethernet software products with the versions on the SIMATIC NET DVD (sw\Driverdisk folder). If this is newer, please create a new driver disk / CD by copying the content of the folder (sw\Driverdisk) to an empty CD and then use this as the driver disk.

 

General

The notes on the CP 1613 A2 listed in Section 11.2 also apply to the CP 1623.

 

 

12.3    Notes on project engineering and configuration

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

·         Link German: http://support.automation.siemens.com/WW/view/de/15227599

·         Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

13.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

13.2    Restrictions and notes

 

PC network operation

PC network operation is released only for the TCP/IP protocol.

 

Number does not match slot

If there is more than one CP 1613 A2/CP 1623 module plugged in, the number of the module assigned by the SIMATIC NET software provides no information about the physical slot.

 

Restrictions configuring S7 connections

All communications modules of a PC must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work.

 

S7 programming interface: return values of the "s7_receive" function

When evaluating the return values of the "s7_receive" function, if unexpected values occur, the "s7_discard_msg" function must be called in the default branch of the corresponding switch instruction.

 

T communication

T communication is not supported by the SIMATIC NET PC products.

 

PC-PC communication with CP 1613 A2/CP 1623 to IE SOFTNET S7 with Fast Acknowledge

Communication between a PC with a CP 1613 A2/CP 1623 communications processor and another PC with Industrial Ethernet SOFTNET S7 over ISO-on-TCP (synonymous with TCP/IP (RFC 1006)) is not possible under the following conditions:

·          PC with CP 1613 A2/CP 1623 only sends.

·          PC with CP 1613 A2 /CP 1623 does not provide receive resources.

·          "Fast Acknowledge is activated" ("Configuration Console").

Remedy: Disable fast acknowledge in Industrial Ethernet SOFTNET S7.

 

 

13.3    Notes on project engineering and configuration

 

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

Link German: http://support.automation.siemens.com/WW/view/de/15227599

Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

 

 

 

The TF communications protocol is no longer supported by this SIMATIC NET software.

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

Please note the descriptions of fault tolerant systems in the "Industrial communication with PG/PC" manual.

 

 

15.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

15.2    Notes on the product

 

Use of the "Power Pack S7-REDCONNECT" product

The "Power Pack S7-REDCONNECT" product is intended for users who have already installed the "Industrial Ethernet HARDNET S7" product (with the current DVD, "SIMATIC NET, PC Software V8.1") and now want to use the functions of "S7-REDCONNECT".

 

 

15.3    Restrictions

 

Do not use AUI cable

The CP 1613 A2 has two jacks for connecting network cables: The 15-pin sub-D female connector with slide locking mechanism both for connection of an AUI transceiver cable (AUI ‑  Attachment Unit Interface) and for connecting an ITP cable (ITP  –  Industrial Twisted Pair), and the RJ-45 jack for connecting a TP cable (TP  –  Twisted Pair).

For fault-tolerant connections, use only the 15-pin D-sub female connector for ITP cable or the RJ-45 jack for TP cable but not the AUI port for AUI transceiver cables!

 

Redundant S7 connections

Redundant S7 connections between PCs are not possible.

 

Deactivating protocols

The protocols TCP/IP and ISO must be activated since they are necessary for configured operation!

 

Restrictions configuring S7 connections

All communications modules of a PC must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work.

 

S7 programming interface: return values of the "s7_receive" function

When evaluating the return values of the "s7_receive" function, if unexpected values occur, the "s7_discard_msg" function must be called in the default branch of the corresponding switch instruction.

 

Sporadic connection aborts

·         When using older versions of the CP 443-1 (up to "CP 443-1 EX02"), switching over between stop/start on an H-CPU can lead to connection aborts; Remedy: Replace the CP with a new version of the CP.

·         If there is continuously high CPU usage on the PC, connection aborts are possible with slower network components; Remedy: Whenever possible, use 100 Mbps, full duplex.

 

 

15.4    Notes on installation, configuration, project engineering

 

Fixed parameter values

The settings of persistence count and abort timeout using the SAPI S7 mini DB have no effect on fault-tolerant S7 connections. On such connections, fixed internal values are used to achieve the necessary, short failover times.

 

How to configure fault tolerance

 

Step

Description

1

Enter all the hardware components of your automation system in STEP 7, HW Config. These include both the CPs in the SIMATIC S7 stations as well as the user applications on the PCs and the SIMATIC NET network adapters.

2

Following this, you can configure the fault tolerant S7 connections for the individual user programs:

·         After saving in HW Config, you set the addresses for the CPs with STEP 7, NetPro and connect the CPs to the appropriate subnets.

·         Select "S7 connection fault-tolerant" for the connection type parameter.

·         In the properties dialog, you decide whether you want to 2 or 4 path redundancy for this connection by activating the "max. CP redundancy" check box.

3

Save and compile in NetPro to generate the databases (SDB and XDB files). Download the databases to the S7 stations and download or import them to the configure PC stations.

 

For more detailed information, refer to the "Commissioning PC Stations (with Advanced PC Configuration)" manual.

 

Please remember that following any change in the connection configuration in STEP 7, NetPro the current configuration must be downloaded or imported again into the S7 and PC stations.

 

Configuring a CP 443-1

If you insert a CP 443-1 into a SIMATIC S7-H station, the "Activate fast failover of the connection" check box must be activated (dialog box "Properties – CP 443-1 ..." ->Options -> Ethernet Profile for Fault-Tolerant Connections -> activate fast failover of the connection).

 

How 4-path redundancy functions

If you have configured your fault-tolerant S7 connection with maximum CP redundancy (4 paths), if the productive or reserve path fails, another connection path will be established (assuming it is available). The failover can take between several seconds and several minutes depending on your configuration.

The connection is then “redundant” again (over a new path).

Please note that depending on the configuration, it is possible that the two connection paths now include non-redundant components (not ideal redundancy). At this point, one further redundant component can fail without S7 communication being disturbed (as long as it is not used by both paths).

For more detailed information, refer to the document "Industrial Communication for PG/PC".

 

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

Link German: http://support.automation.siemens.com/WW/view/de/15227599

Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

 

15.5    "S7 Connection Diagnostics"

 

Area of application

This program makes it easier to commission fault-tolerant connections and informs you when there is a problem on a specific connection path.

 

Start

The use of the diagnostic program is possible only when you have downloaded a STEP 7 and accordingly a NCM PC configuration.

You start the diagnostic program from the SIMATIC path (Windows Start menu “Start” -> “...”  -> “SIMATIC” -> “SIMATIC NET” -> “S7 Connection Diagnostic”).

 

Online help

Click on the “?” menu command -> “Contents” for information on the program.

 

Dealing with memory access violations

If there is a memory access violation in an application that works with S7-REDCONNECT, or if it no longer reacts for one reason or another, it is possible that the display in the diagnostic program is no longer refreshed. In this case, you must restart all applications that use S7 connections.

 

Software diagnostic interface

It is also possible to read diagnostic data from your own user program. See Section "Diagnostic Services for Fault-tolerant Connections" in the "S7 Programming Interface" manual.

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

16.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported (not the CP 1612)

V8.0

·       Windows 7, 32 Bit is supported

 

 

16.2    Notes

 

 Current driver disk (exclusive PC network operation)

Please compare the version of the driver disk / driver CD of your SIMATIC NET Ethernet software products with the versions on the SIMATIC NET DVD (“sw\Driverdisk folder”). If this is newer, please create a new driver disk / CD by copying the content of the folder (“sw\Driverdisk”) to an empty CD and then use this as the driver disk.

 

Wrong network adapter driver displayed following an update

After a Windows update, it is possible that the "Device Manager" displays a "Realtek PCI GBE Family Controller" instead of the CP 1612 A2 under "Network adapter".

To eliminate this problem, delete the relevant driver completely and restart the PC. After the restart, the CP 1612 A2 should be reinstalled automatically. If this is not the case, install the CP 1612 A2 driver manually. Use the supplied CD/DVD ("…\sw\Driverdisk\CP1612A2"). Following installation, the CP 1612 A" needs to be reconfigured.

 

 

16.3    Restrictions

 

Modules per computer

Per computer, only one module of the type CP 1612 A2 or IE General can be used in configured mode.

 

Hot plugging

The CP 1612 and CP 1612 A2 communications processors are not approved for hot plugging. 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

17.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

17.2    Notes on the product

 

PNIO_data_read( ) without user data

The PNIO_data_read( ) function can also be called with the parameters "BufLen=0" and "pBuffer=NULL" to simply read the remote status of the communications partner.

 

Recompiling applications

Improvements were made to SN PN IO that have repercussions on earlier versions. You should therefore recompile applications that use the C interface of SN PN IO if your application was created with a version of the SIMATIC NET CD older than Edition 2008.

 

 Defining the preprocessor directive "PNIO_Softnet"

In an SOFTNET PN IO application that uses the C interface of SOFTNET PN IO, the PNIO_SOFTNET #define must be defined before header files are linked.

 

Logging off applications

When you close an application, without first executing the "PNIO_close()" function, this can sporadically have the result that no new connections can be established to PNIO. In this case, you will need to restart your PC.

 

 

17.3    Restrictions

 

Diagnostics functionality with shared devices

If network adapters are operated as a controller with shared devices, diagnostics does not work.

 

Number of network adapters

A maximum of one (1) network adapter with SOFTNET PN IO can be operated.

 

Deactivating Ethernet network cards

Ethernet network cards must not be deactivated.

 

Deactivating protocols

None of the protocols TCP/IP, PROFINET IO RT, and ISO must be deactivated since they are necessary for configured operation!

 

Writing to individual submodules of an ET 200S

It is only possible to write to individual submodules of an ET 200S station after all submodules of this station (with status=Good) have been written to. This applies both during startup and when a station returns following station failure.

This restriction is due to the firmware version of the ET 200S and does not apply as of version V2.0.0.

 

Update times for cyclic data exchange

The update time proposed by STEP 7 must be increased as follows if you have a larger hardware configuration:

·         up to 16 devices: 8 ms

·         up to 32 devices: 16 ms

·         up to 64 devices: 32 ms

The information above applies in 100 Mbps full duplex mode, with an adequately powerful PC (CPU utilization < 40%).

 

Operation with CP 1613 A2 or CP 1623

It is not possible to operate SN PROFINET IO over the CP 1613 A2 or CP 1623 .

 

Restrictions in the PROFINET IO-Base user programming interface

The use of CLEAR mode in the current version is not adequate to switch IO devices to the safe status. For all modules, the function "PNIO_data_write" must be called with the parameter "IOLocState=BAD".

The "PNIO_data_read" function can be executed even in CLEAR mode.

The use of the CLEAR mode is therefore not released even with the OPC interface using the "&mode()" and "&modeval()" items.

The "PNIO_controller_close()" function must only be used in the OFFLINE mode.

The user may only call "PNIO_set_mode" again when a previous "PNIO_set_mode" job was acknowledged with PNIO_CBE_MODE_IND.

 

PNIO_rec_read_req (send read data record job) parameter "Length"

"Length" parameter: Maximum length of the data record (in bytes) to be transferred by the IO device. The pointer to the data record and its actual length is returned by the callback event PNIO_CBE_REC_READ_CONF.

 

Callback event PNIO_CBE_REC_READ_CONF (report result of a read data record job)

"Length" parameter: Length of the transferred data record (in bytes) to which "pBuffer" points.

"pAddr": Address of the module of the device that answered the read data record job.

 

Hyperthreading

On PCs with activated hyperthreading, it may take longer for the PROFINET IO system to start up (several minutes): Remedy: Disable hyperthreading (BIOS).

 

Data records

This version supports reading of data records only up to a length of 480 bytes.

 

"Accessible nodes“ and "Assign Ethernet address“ in PROFINET IO mode

When running a PROFINET IO user program, the "Accessible nodes" function in STEP 7 or the "Assign Ethernet Address" function in NCM S7 diagnostics must not be executed via the same Ethernet interface. First exit your PROFINET IO user program or use different Ethernet interfaces.

 

Download during PROFINET IO operation

While a PROFINET IO user program is active, there must be no download of a configuration. First shut down your PROFINET IO user program.

 

No XDB import in "offline mode"

During the XDB import of a SOFTNET PN IO project, the "Work in offline mode" check box must not be selected. Otherwise calls for the PROFINET IO Base interface are rejected with the error message "PNIO_ERR_INVALID_CONFIG"

 

Sporadic connection aborts under load

If you experience sporadic connection aborts, you should check whether processes on the computer are sometimes interrupting the SOFTNET PN IO data flow. IO load can, for example, be caused by the Windows indexing service, the background defragmentation or heavy network traffic.

If there is no improvement after reducing simultaneously running processes, the system stability can be improved by increasing the default update time of 8 ms to 16 ms or 32 ms.

You should consider updating the hardware if the kernel times exceed the 40% mark for longer periods in the Windows task manager. Here, a modern multi-core CPU is much more resilient to connection aborts caused by IO load than a single core CPU.

If these measures do not bring about an improvement in the system performance, please contact Customer Support to work out an individual solution.

 

Simultaneous operation of a C application and the PROFINET IO OPC server is not released

In SIMATIC STEP 7/NCM PC, if the PROFINET IO controller of an IE general CP is assigned to the OPC server application, simultaneous operation of an unassigned C IO Base application and the assigned PROFINET IO OPC server is not released.

 

 

17.4    Notes on project engineering and configuration

 

Network bridge

With a network card that has been added to a "Network bridge" added, it is not possible to operate SOFTNET Industrial Ethernet.

If you want to use a network card inserted in a network bridge for SIMATIC NET products, you must first remove it from the network bridge before installing the "SIMATIC NET PC Software".

 

Deactivated network adapters

When you install the SIMATIC PC software over older versions, deactivated network adapters are reactivated.

 

Configuration limits and performance data of the modules

You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID 15227599.

Link German: http://support.automation.siemens.com/WW/view/de/15227599

Link English: http://support.automation.siemens.com/WW/view/en/15227599

 

Registering a network adapter for configured mode

A network adapter only needs to be registered for configured mode when the configuration was downloaded with SIMATIC STEP 7/NCM PC to the PC station or imported using an XDB file before the computer was restarted.

 

PROFINET IO OPC server and security settings

If the "Disable" button was clicked in the "Security" dialog in the "Configuration Console" program, you will need to click the "Enable" button (remote basic and OPC communication first before you can resume remote communication over the PROFINET IO OPC server.

 

 

 

 

Please make sure that you read the following sections in this document:

Section 24, "General requirements, notes, and restrictions"

Section 25, "Information, restrictions and notes relating to OPC"

Section 26, "Notes on license keys"

Section 27, "Requirements and restrictions relating to hardware in general"

Section 28, "Notes on C programming interfaces"

Section 29, "Notes on project engineering, configuration and NCM"

Section 32, "Operating systems"

You only need to read the other sections if they relate directly to your product.

 

 

18.1    Version history

 

Version

Changes/additionally supported functions

V8.1

·       Windows 7, 64 Bit and Windows Server 2008 R2 is supported

V8.0

·       Windows 7, 32 Bit is supported

 

 

18.2    Restrictions

 

Number of network adapters

A maximum of 1 (one) network adapter with Industrial Ethernet SOFTNET S7 can be operated.

 

Deactivating Ethernet network cards

Ethernet network cards must not be deactivated.

Deactivating protocols

None of the protocols TCP/IP, PROFINET IO RT, and ISO must be deactivated since they are necessary for configured operation!

 

Note on the SEND/RECEIVE programming interface and OPC, use of expedited data over ISO connections

If data packets of the "Expedited Data" type are transferred on a SEND/RECEIVE ISO connection, the receiving application at the PC must make sure that this data is actually accepted. Otherwise, the buffering of these data packets can lead to a lack of memory that can eventually cause the connection to be terminated.

This means that if you use an ISO connection with your OPC user program, a receive item must be activated on this connection.

 

Restrictions configuring S7 connections

All communications modules must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work.

Источник: https://support.industry.siemens.com/cs/attachments/52566921/readme_8_1.htm
10.9 8

SPEC OVERVIEW

PERFORMANCE

CONNECTIVITY

COOLING

LIGHTING

AUDIO

ULTRA DURABLE

GIGABYTE EXCELLENCE

1

Advanced Thermal Design with Enlarge Heatsink

• 1.5mm Thick Thermal Pad

3

GIGABYTE Gaming GbE LAN

• Bandwidth Management Software

4

Integrated I/O Shield

• Q-Flash Plus USB Port

5

PCIe 4.0 x16/x4/x1 Slot

• 1X Ultra Durable PCIe Armor

6

Audio Solutions

• ALC887 Audio
• Audio Noise Guard
• High-End Audio Capacitors

7

10+2 Phases Digital VRM Solution with Lower RDs(on) MOSFETs

8

Supports AMD Ryzen™ Series Processors

• Dual Channel DDR4, 4 DIMMs

9

Solid Pin Power Connectors

• 24 pin ATX Power Connector
• 8 pin CPU Power Connector

10

Dual PCIe 4.0 x4 M.2 Connectors

• PCIe 4.0/3.0 x4 NVMe support
• 1X M.2 Thermal Guard

11

RGB FUSION 2.0

• Addressable LED Header*2
• RGB LED Header*3

GET READY FOR AMD RYZEN™ 5000 SERIES

GIGABYTE X570 motherboards based on the AMD X570 Chipset provide full support for latest AMD Ryzen™ 5000 Series Processors. The all-new design is a testament to GIGABYTE dedication to design quality. GIGABYTE X570 motherboards offer a rich list of features such as support for PCIe 4.0, USB Type-C™ interfaces on select boards, refined audio, high speed of Ethernet and latest standard of WIFI design, to fulfill users' performance, audio, and data transfer needs. The new, advanced power and thermal design enables users to unleash the performance on AMD Ryzen™ 5000 Series Processors, making the GIGABYTE X570 motherboards perfect for users looking to build the best AMD platform gaming system.

AMD Ryzen™ 5000, 4000, 3000, 2000 Series Compatible

AMD StoreMI technology

GIGABYTE X570 motherboards maximize your PC's potential with AMD StoreMI technology. StoreMI accelerates traditional storage devices to reduce boot times and enhance the overall user experience. This easy-to-use utility combines the speed of SSDs with the high capacity of HDDs into a single drive, enhances the read/write speeds of the device to match that of SSDs, bolsters data performance for incredible value, and transforms the everyday PC to a performance driven system.

The benefits of AMD StoreMI:

• Making the PC experience fast, smooth and easy
• Optimizing computer responsiveness from system boot to application launch
• Offering SSD performance with HDD capacity at an affordable cost
• Quickly accessing key files by automatically learning users' computing behaviors

Detail information please refer AMD official website: https://www.amd.com/en/technologies/store-mi

PERFORMANCE

10*+2 Phases Digital VRM Design with Lower RDS(on) MOSFET

Optimized for AMD 3000 series CPU

GIGABYTE X570 motherboards use a 10*+2 phase PWM + Lower RDS(on) MOSFETs design to support the latest AMD Ryzen™ 3000-series CPUs by offering incredible precision in delivering power to the motherboard's most power- hungry and energy-sensitive components as well as delivering enhanced system performance and ultimate hardware scalability.
* Doubled from 5 phases with current balancing.

Benefits of Lower RDS(on) MOSFETs

‧ Optimized gate charge to minimize switching losses.
‧ Lower temperature, smaller size, better thermal characteristics.

Advanced Thermal Design

1. Enlarge MOSFET Heatsinks

Enlarge heatsink surface area improves thermal performance by increasing heat dissipation surface and maintain stylish aesthetic.

2. Thick Thermal Pad

Improve thickness of the thermal pad to 1.5mm, gives superior heat dissipation of MOSFETs.

Smart Chipset Fan Heatsink

Smart Fan

  1. Provides 3 different operating modes to minimize noise and extend the fan’s longevity. Silent, Balanced and Performance modes, choose the mode that suits you the best in any situation.

High Durability

  1. X570 motherboards adopt a high quality ball bearing fan which guarantees 60,000* working hours.

  2. * MTBF, A standard measurement that continuously operates under certain criteria with 90 % of confidence level.

Pre-installed I/O Shield Armor

Durable design and easy installation

  1. With an integrated base plate, GIGABYTE Motherboards give users a strong foundation to build their Gaming PCs.

  2. With an integrated I/O shield, building a GIGABYTE Ultra Durable PC is even easier.


Full PCIe 4.0 Design

GIGABYTE X570 motherboards push the envelope once again by featuring Full PCIe 4.0 Design, including PCIe 4.0 slots, PCIe 4.0 M.2 connectors and delivering highly optimized performance and flexibility demanded for power users and extreme gaming enthusiasts.

PCIe 4.0 Hardware

PCIe 4.0 M.2 Connectors

XMP 4000+

GIGABYTE X570 Motherboards feature built-in PCIe 4.0 slots, delivering superior bandwidth compared to that from previous generation technology. Performance of Graphics cards and PCIe NVMe AIC SSDs will not be limited by insufficient bandwidth.

PCIe 4.0 slots have higher slot signal stability and lower impedance, maximizing PCIe bandwidth while also being backwards compatible with PCIe 3.0.

PCIe Bandwidth*

PCIe 4.0 x16

PCIe 3.0 x16

Transfer speed

* Theoretical bandwidth based on PCI Express specification

Up to 31.5GB/s*

Up to 15.8GB/s*

Slot Signal Stability*

PCIe 4.0 Slot

PCIe 3.0 Slot

Differential impedance

* Based on PCIe 4.0 differential impedance specification

    Dual PCIe 4.0 M.2 Connectors

    GIGABYTE Motherboards are focused on delivering M.2 technology to enthusiasts who want to maximize their systems’ potential.

    Dual PCIe 4.0 SSD in RAID 0

    Extreme Performance with Gen3 x4 NVMe PCIe SSDs

    GIGABYTE motherboards offer the industry’s best compatibility in terms of NVMe storage for users who demand high capacity and seek the best performance. GIGABYTE‘s unique design can be configured in RAID for record speeds of up to 9534 MB/s (Sequential Read), making GIGABYTE the obvious choice for the ultimate PC.

    M.2 + M.2

    Extreme sequential Read 9534 MB/s, Sequential Write 8243 MB/s speed

    GIGABYTE M.2 Thermal Guard Design for Gen4 SSD

    GIGABYTE Ultra-Efficient M.2 Thermal Guard

    GIGABYTE provides thermal solution for M.2 SSD devices. The M.2 Thermal Guard prevents throttling and bottlenecks from high speed M.2 SSDs as it helps to dissipate heat before it becomes an issue.

    Thermal Throttling As Temperature Rises

      Support for DDR4 XMP Up to 4000MHz and Beyond*

      GIGABYTE is offering a tested and proven platform that ensures proper compatibility with profiles up to 4000MHz and beyond. All users need to do to attain this performance boost is to ensure that their memory module is XMP capable and that the XMP function is activated and enabled on their GIGABYTE motherboard.

      Broad DDR4 Compatibility with Support List of 1000+ DDR4 Validated!

      GIGABYTE partners very closely with memory vendors from around the world to ensure that modules offered by popular memory brands are compatible with GIGABYTE Motherboards. GIGABYTE has verified over 1000+ different modules to ensure performance in a GIGABYTE built system.

      CONNECTIVITY

      Next Generation Connectivity

      A high-end product needs to be future-proof so your system stays up-to-date with the latest technology. GIGABYTE motherboards provide all next generation network, storage to keep you up to speed.

      Next Generation Connectivity

      GIGABYTE Gaming LAN

      HDMI 2.0

        Exclusive Realtek 8118 Gaming LAN

        High Speed Gigabit LAN with Automatic Bandwidth Allocation

        Realtek 8118 LAN is a high performance and friendly network chip for gaming players with automatic bandwidth allocation to ensure the highest network priority of the game or application. It can provide users the most comprehensive features and the fastest and smoothest Internet experience.

        Program On Top Gets Highest Priority

        Real-Time Network Monitoring

        HDMI 2.0 for 4K / 60P / 21:9 / HDCP 2.2 Support

        HDMI 2.0, which is backwards compatible with HDMI 1.4, offers 18 Gb/s of bandwidth – nearly twice that of the previous generation. This unlocks the potential for users to transfer multiple video streams, as well as a native cinematic 21:9 ratio (which most movies are shot in), offering the best visual experience for viewers.


        Note: Only Picasso and Raven Ridge APUs support displaying function.

        COOLING

        Smart Fan 5

        With Smart Fan 5 users can ensure that their gaming PC can maintain its performance while staying cool. Smart Fan 5 allows users to interchange their fan headers to reflect different thermal sensors at different locations on the motherboard. Not only that, with Smart Fan 5 more hybrid fan headers that support both PWM and Voltage mode fans have been introduced to make the motherboard more liquid cooling friendly.

        Fan / Water Pump Connectors
        Internal Temperature Sensors

        Different models have different number of fan pin headers and temperature sensors. Smart Fan 5 function may vary by model.

        Temperature Sensors

        Hybrid Fan Headers

        ■ 4 Fan / Water Pump Connectors
        ■ 6 Temperature Sensors
        ■ All Fan Pin Headers Upgraded to Hybrid Fan Headers
        ■ Interoperable Fans and Sensors
        ■ Intuitive UI for Fan Control

        FAN STOP

        Hybrid FAN Header

        Smart Fan 5 Software

        Achieve fan silence. With Fan Stop, map any fan to stop completely when temperatures drop below a specified threshold. Which fan stops, based on readings from which sensor, and at what temperature—all of it can be customized to your liking.

        Intelligent Fan Control Design

        Hybrid Fan Pin Headers

        Assume complete control over your liquid cooling setup! Smart Fan 5 receives up-to-the-second information on flow-rate and water-temperature through the Hybrid Fan Pin Headers, giving you absolute mastery over your PC.
        • All Hybrid Fan Headers can automatically detect the type of cooling device whether it be fan or pump with different PWM or Voltage mode.

        New Smart Fan 5 Software

        Choose from different modes, Quiet to Full Speed, to match your system usage preferences.
        For each fan or pump, you can use the intuitive fan curve to define trigger thresholds and corresponding fan speeds.

        LIGHTING

        RGB FUSION 2.0

        RGB Fusion 2.0 offers users the option to control onboard RGB and external RGB / Addressable LED light strips for their PC. With external Addressable LED strips*, where each LED is digitally addressable, users can experience even more patterns, styles, and illuminations.

        GIGABYTE Motherboards support 5v Addressable LED lighting strips and up to 1000 LED lights. RGB Fusion 2.0 with Addressable LEDs comes with new patterns and various speed settings with more to come.

        With full RGB support and a redesigned RGB Fusion 2.0 application, the user has complete control over the LEDs which surround the motherboard.

        RGB Fusion 2.0 Ready

        RGB Fusion 2.0 Software

        RGB Fusion APP

        With a dazzling array of products supported, RGB Fusion 2.0 is the software that brings it all together, letting your accessories synchronize to the same beat. Customize all your LEDs how you like — have them match, dazzle and impress. Learn more about RGB Fusion 2.0

        With an integrated intuitive user interface, the RGB Fusion 2.0 provides you a better solution for customizing the lighting effects across all supported devices. From motherboards, graphics cards to the peripheral products, you can personalize your gaming rig with your own style and show off your build by sharing the profiles. In addition, the new gaming mode makes the lighting effects interactive with selected games to bring you the most immersive gaming experience.

        Sync with one click

        Individual control as you wish

        GIGABYTE RGB Fusion APP

        Don't just make your PC shine, make it a work of art that friends will envy. With the GIGABYTE RGB Fusion mobile app users can watch as they control the lighting within their gaming PC. This gives users ease of access as they try and adjust colors and speeds for different modes, all this can be achieved away from the keyboard and monitor of their PC.

        AUDIO

        High-End Audio Capacitors

        GIGABYTE motherboards use high-end audio capacitors. These high quality capacitors help deliver high resolution and high fidelity audio to provide the most realistic sound effects for gamers.

        Audio Noise Guard

        GIGABYTE motherboards feature an audio noise guard that essentially separates the board’s sensitive analog audio components from potential noise pollution at the PCB level.

        ULTRA DURABLE

        Q-Flash Plus

        Update the BIOS easily without installing the CPU, memory and graphics card.

        Источник: https://www.gigabyte.com/Motherboard/X570-GAMING-X-rev-11

        Untitled — Diablo 2 Lod 1.11 Patch Download

        Diablo 2 Lod 1.11 Patch Download

        image


        1. Diablo 2 Lod 1.11 B Patch Download
        2. Diablo 2 Lord Of Destruction Patch 1.11 Download
        3. Diablo 2 Lod 1.11 Patch Download Mediafire

        Top 10
        01. (0) Euro Truck Simulator 2
        02. (0) Vampire: The Masquerade - Bloodlines
        03. (+1) The Sims 3
        04. (-1) World of Warcraft
        05. (0) Might & Magic Heroes 6
        06. (+1) Mount & Blade: Warband
        07. (0) Scania Truck Driving Simulator
        08. (+2) Euro Truck Simulator
        09. (-1) Civilization 5
        10. (+4) Starcraft 2

        Donations so far: €503,45

        This page is no longer being updated!
        Please update your bookmarks and visit www.patches-scrolls.de from now on.


        File information
        Name:
        Size:
        Date:
        Desc:
        lodpatch_111b.zip
        6.41 MB
        2005-09-14
        Diablo 2: Lord of Destruction patch 1.11b
        This file has been downloaded 8367 times since 2005-09-14.
        Download locations
        ServerLocationMirror provided by
        Mirror 1 [http]PS, Dresden, Germanypatches-scrolls.de
        Disclaimer
        All programs offered on patches-scrolls.de for download are protected by the copyright of the releasing software company or programmer. patches-scrolls.de advices everyone to read the patch installation manual and rejects any liability for damages resulting from the use of the patch.
        Copyright: The Patches Scrolls, 1995-2013

        Diablo 2 Lod 1.11 B Patch Download

        Diablo

        Diablo 2 Lord Of Destruction Patch 1.11 Download

        Diablo 2 lod 1.11 patch download pc

        Diablo 2 Lod 1.11 Patch Download Mediafire

        Download - 5.15 MB Diablo 2 Views: 64,027 Downloaded: 24,557 1.12a Blizzard. This is the patch for the PC game Diablo 2 Lord of Destruction.

        The 1.11 patch for Diablo II. Since the beginning of time, the forces of Order and Chaos have been engaged in an eternal struggle to decide the fate of all Creation. Diablo 2 v1.10 english fixed exe (47.1kb) diablo 2 v1.11 english no-cd patch/multiplayer patch (50.5kb) diablo 2 v1.11 english no-cd/fixed exe (1.04mb) diablo 2 v1.11 english no-cd/fixed exe (1.04mb) diablo 2 v1.11b english no-cd/fixed exe (1.05mb) diablo 2 v1.11b english single player/multiplayer no-cd/fixed exe (17.4kb) diablo 2.



        image

        More you might like

        Infiniti Player Vst Download

        image


        Description

        Infiniti Player Vst Free Download

        StudioLinked Infiniti Player v1.1 VST AU AAX Size WIN/OSX 1.92 Gb/1.9 Gb. Infiniti Player is a powerful rompler Engine built for modern music production. Whether you create in a studio or on the go. InfinitiPlayer is always prepared to perform. Infiniti Player is a powerful rompler Engine built for modern music production. Whether you create in a studio or on the go. Infiniti Player is always prepared to perform. Its impressive builtin factory sound library contains over 500 multi sampled acoustic and synthesized instruments. Is total av really free - Crack Key For U Player purchasers will receive 2 free expansion packs.

        1. Infinite Player by Sonic Reality is a Virtual Instrument Audio Plugin and a Standalone Application for macOS and Windows. It includes, and is therefore ‘powered by’, Kontakt Player, which functions as a VST Plugin, an Audio Units Plugin, an AAX Plugin and a Standalone Application.
        2. StudioLinked Infiniti Player v1.1 VST AU AAX (WIN OSX) Team DECiBEL WiN (VST AAX): 1.92GB MacOSX (VST AU AAX): 1.90G POWERFUL PLAYER ENGINE Control amazing, sampled instruments Advanced Sound design options Expand your sound with 3500+ instruments / 16+ GB.

        BUY NOW and DOWNLOAD instantly StudioLinked – INFINITI PLAYER PC With 8 Libraries full version at a very affordable price right here where VST-Plugin.SHOP makes your best source of VST plugins and all the tools you need.

        NOTE ! THIS VERSION IT’S FOR WINDOWS ONLY ( FOR MAC PLEASE CONTACT US FIRST )

        Infiniti Player Vst Download

        Infiniti Player is a powerful rompler Engine built for modern music production. Whether you create in a studio or on the go. Infiniti Player is always prepared to perform.
        Its impressive builtin factory sound library contains over 500 multi sampled acoustic and synthesized instruments. For all who purchase Infiniti Player will receive 2 free expansion packs.
        INFINITI PLAYER comes with advanced synthesis controls that are perfect for sound designers. Activate LFO, select Waveform and control its destination.
        The Chord Section allows you to play any major, minor or diminished chord type. Music theory can some times be a challenge so we added controls to add a 7th, 9th or 11th to your chord structure.
        Infiniti Player has an advanced arpeggiator. With the first ever 3x up, up down & down up arp types.
        The library rack allows you to browse between & organize expansion packs. What makes Infiniti also stand out from the rest is its 3D animation library system. Each sound library contains a unique animation clip. So there is always something visually moving or lighting up when notes are being triggered.
        Comes in VST – AAX formats. Compatible for PC 32Bit and 64Bit.
        As well as full 64bit support.

        INFINITI PLAYER COMING WITH NEXT LIBRARIES:
        – Alien Leads Library
        – Analog Phatness Library
        – Cinematic Library
        – Gamebits Library
        – Dark Pads Library
        – Synth Addict Library
        – Trap Stabz Library
        – Waveforms Library

        She works at the Silver Blood Inn, which is operated by her parents, Frabbi and Kleppr.Name: HrokiLocation: MarkarthRace: NordBase ID: 0001339EFOMOD Options:- Choice of UNP (HDT special) and CBBE (COS)- Custom outfit included: Fairytale Outfit- 2K or 4K textures- Choice of 5 hair stylesCONFLICTSAny other mod that makes changes to Hroki’s appearance or stats.If it’s only stats, then this mod can be loaded afterwards. Dimonized unp body skyrim download. Located in Falkreath Deadman’s Drink.FOMOD Options:- Replacer OR standalone follower- Choice of UNP (HDT special) and CBBE (COS)- Custom outfit included: Steel Bikini- 2K or 4K textures- Choice of 5 hairstylesCONFLICTS- Any other mod that makes changes to Rayya’s appearance or stats.If it’s only stats, then this mod can be loaded afterwards. During the day she can be found at the market stalls inside the gates. If it’s appearance, then it’s a definitive no, unless you know how to remove the entry for Rayya in the conflicting plugin file, using TESEdit.Notes & Troubleshooting, Issues- Steel Bikini Armor will use whatever existing steel textures you have installed. (Upload NOWHERE ELSE!)This is an NPC cosmetic replacement for Hroki.Character Background: Hroki is a teenage Nord residing in Markarth.

        Download

        Compression
        Distortion
        WOBBLE KNOB
        Hi & Lo Pass Filters
        ARPEGGIATOR
        Legato,
        GLIDE
        Vibrato
        Tremolo
        Pitch Envelope
        Phaser
        Reverb
        Delay (Tempo Sync)
        ADSR envelope preset menu
        Filter preset menu

        500+ presets + expansion packs&hellip. gives users an infinite amount of sound possibilities.

        AVALIBLE Formats:
        VST- AAX

        Works in Fl Studio,Protools, SONAR, Maschine, ABLETON LIVE,CUBASE,STUDIO ONE, MPC REN

        PROTOOLS USERS: ONLY SUPPORTS PROTOOLS 11 AND UP

        – VST or Product Full Name: StudioLinked – INFINITI PLAYER PC With 8 Libraries
        – File Name: StudioLinked – INFINITI PLAYER PC With 8 Libraries.zip/rar
        – File Type: Offline Installer / Full Standalone Setup
        – Setup Compatibility Architecture: 32 Bit (x86) / 64 Bit (x64)
        – Product Homepage: https://rebrand.ly/xbttra

        Before you start install StudioLinked – INFINITI PLAYER PC With 8 Libraries full download version, make sure your PC or Mac meets minimum system requirements.

        Infiniti Player Vst Free Download

        Mac OS X: 10.7

        Download, discover, share

        Latest version

        1.1.0

        Sep 12th, 2015

        Older versions
        Router Keygen for Windows has arrived. The popular application to decrypt Android WiFi passwords is now available for the Microsoft operating system, with all the features it brings when it comes to testing WiFi network passwords.

        Just like the app for cellphones and tablets, Router Keygen for Windows interface is very simple. In the main window you'll have three tabs separating all the WiFi networks that can be found in your vicinity: on one side the ones supported by Router Keygen, on another the ones probably not supported, and finally the ones that you're sure not to be able to decrypt.

        On top of this, Router Keygen offers the option to do a manual setup (in case it doesn't find a network). To do so you just have to enter the name of the network you want to verify and its MAC address. In a few seconds you'll be supplied with the information you want.

        Router Keygen is a very useful tool to check the security of your WiFi network password. In just a few seconds you'll be able to see if it's possible for someone to use your connection. or if it's possible for you to do the same.
        Reviewed by Andrés López Translated by Samantha Eyler-Driscoll

        Notes

        Router Keygen generates generic WPA/WEP keys for the following router models:

        -Routers based on Thomson (SpeedTouch, Orange, Infinitum, BBox, DMax, BigPond, O2Wireless, Otenet, Cyta, TN_private, Blink)
        -DLink
        -Pirelli Discus
        -Eircom
        -Verizon FiOS
        -Alice AGPF
        -FASTWEB Pirelli and Telsey
        -Huawei
        -WLAN_XXXX or Jazztel_XXXX
        -Wlan_XX
        -Ono (P1XXXXXX0000X)
        -WlanXXXXXX, YacomXXXXXX and WifiXXXXXX
        -Sky V1 routers
        -Clubinternet.box v1 and v2 ( TECOM-AH4XXXX )
        -InfostradaWifi
        -CONN-X
        -Megared
        -EasyBox, Arcor and Vodafone
        -PBS (Austria)
        -MAXCOM
        -PTV
        -TeleTu/Tele2
        -Axtel, Axtel-xtremo
        -Intercable
        -OTE
        -Cabovisao Sagem

        More information

        Older versions

        Rate this App

        Review the app

        Rating

        1.0
        1 reviews

        comments

        Similar to Router Keygen

        Discover Internet apps

        Источник: https://router-keygen.en.uptodown.com/windows
        10.10

        Annotate Everywhere

        Release ID: RoomOS 2019-12-16 285a7f8edd1

        You can now annotate on web pages and files you share on a Webex Board. This works similarly to annotating on presentations. You can save the annotations for later reference to a Webex Teams space or send them by email.

        Read more about annotation in Annotate on Cisco Webex Boards and Annotate on Screen Share From Cisco Webex DX70 and DX80 in a Call.

        Save Your Work on DX70 and DX80

        Release ID: RoomOS 2019-12-16 285a7f8edd1

        You can save your whiteboards and annotations to a Webex Teams space or by email just as you have previously done on Webex microsoft office word 2007 free download full version - Crack Key For U Boards. Save your work is available for shared DX70 and DX80.

        Read more about saving your work in Save a Whiteboard from Desk Devices to Cisco Webex Teams and Send a Whiteboard from Desk Devices by Email articles.

        New Whiteboarding Workflow

        Release ID: RoomOS 2019-12-16 285a7f8edd1

        We’ve updated the icons in the whiteboard menu to make working on your content easier. Saving options are more visible and crack hypersnap 8 you have the option to save your work to an existing space. smadav review - Free Activators Signal Desktop 1.1Download - Crack Key For U

        Companion Mode

        Release ID: RoomOS 2019-11-04 464775546f8

        With companion mode, you can set up one Room Series device and one Webex Board to work as a combined system. Use the room device to make calls and the board for whiteboarding. Shared content is shown on both devices, and the whiteboards are shared to the room device automatically in calls.

        Read more about Companion Mode.

        Learn how to Set Up Companion Mode.

        Touch Redirect

        Release ID: RoomOS 2019-11-04 464775546f8

        Touch redirect enables you to control your laptop from a Webex Board screen when the laptop is connected with an HDMI and a USB cable. Touch redirect is available for laptops running Windows 10. It also works with other operating systems if the operating system supports touch commands.

        Touch redirect only works outside a call.

        Touch redirect is supported on Webex Board 55S, Webex Board 70S, and Webex Board 80S.

        Read Wired Touch Redirect from Webex Boards for more information.

        Add Participants to an Ongoing Call or Meeting

        Release ID: RoomOS 2019-11-04 464775546f8

        You can add other devices or Webex Teams users to an ongoing call or a meeting. Read Add a Participant to an Ongoing Call or Meeting From Your Room or Desk Device for more information.

        Updated Layout on Webex Boards

        Release ID: RoomOS 2019-10-19 97e3752c67a

        Webex Boards are updating layouts to improve the call experience. The active speaker and the PiPs UltraISO 9.71 Crack INCL + Keygen Full Version Download now have separate places on the screen. The PiPs will no longer overlay the active speaker area. This allows the active speaker to always be in full view and improves the visual hierarchy of the screen.

        Name Labels

        Release ID: RoomOS 2019-09-26 14326fc8c9f

        Name labels help people in your organization to get to know each other better. By adding face recognition and name labels to meetings, people get a chance to associate names with faces. Face recognition is used to create name labels for all participants genymotion crack for linux that have signed up in the beginning of the meeting. And after that the name label is visible for the active speaker.

        When you are in a call or a meeting on a Room Series device or a Webex Board that is Webex registered, your name label is visible for the receiving end. You can see the name labels of those who have signed up if you are calling from a DX, SX, MX, or Room Series device or a Webex Board that is Webex registered.

        Check out how to sign up for face recognition in the Sign Up for Face Recognition and Name Labels article.

        Read about how to enable name labels for your organization in the Enable Face Recognition and Name Labels article.

        Redo Option for Whiteboarding

        Release ID: RoomOS 2019-09-12 ee4956daae7

        A Redo button is now available on Webex Boards and Desk devices to bring back what you just removed from your whiteboard. The redo button appears after tapping the undo button. For more information, read Use the Whiteboard on Cisco Webex Board and Use the Whiteboard on Cisco DX70 and DX80.

        Opening Files Stored in OneDrive or SharePoint Online from Files Activity

        Release ID: RoomOS 2019-09-12 ee4956daae7

        Microsoft OneDrive or SharePoint Online files that you have shared in a Webex Teams space can be viewed on Webex Boards. Open the Webex Teams space on a board, access the documents from the Files Activity, and keep working on them from your Webex Board. Signal Desktop 1.1Download - Crack Key For U The Web Engine has to be enabled in order for this feature to be available. Read Enable the Web Engine on Webex Boards to learn how to set it up. Once configured, take a look at this article to learn more about opening Onedrive or Sharepoint Online files on Webex Boards.

        Two-Way Whiteboarding

        Release ID: RoomOS 2019-09-12 ee4956daae7

        You can collaborate on one whiteboard from different Webex Boards in Webex Meetings meetings.

        Advanced Configurations Available on Control Hub

        Release ID: RoomOS 2019-09-12 ee4956daae7

        You can now access advanced configurations for individual room and desk devices and Webex Boards directly from Control Hub. Read more about how to use them in the Advanced Configurations article.

        Stickies on Webex Boards

        Release ID: RoomOS 2019-08-28 7980d1cd53c

        You can create, edit, and move stickies on your whiteboards and annotations on Webex Boards.

        To find out more about stickies on Webex Boards, take a look at this article.

        Open Web Apps from Webex Boards

        Release ID: RoomOS 2019-08-28 7980d1cd53c

        You can now create macros to open web apps on Webex Boards. This way you can access apps such as Jira, Miro, Office 365, and Google docs directly from your board. To read more about how to use macros, take a look at the Use of Macros article.

        If you are using a Webex Board with a Touch 10 controller, the web apps show up only on the Touch 10.

        Changes to the Network Settings Menu

        Release ID: RoomOS 2019-08-16 3dac3cfa60c

        The network settings and information are now available in the same menu on the device’s user interface. The settings that are available have not been changed. 360 total security register license key 2019 - Activators Patch

        New Pen Sizes for Whiteboarding and Annotating

        Release ID: RoomOS 2019-07-02 a37dc2ce640

        You can now choose between three different pen sizes when whiteboarding and annotating on Webex Boards and Desk devices.

        Join Webex Meetings From Your Device

        Release ID: RoomOS 2019-07-02 a37dc2ce640

        It is now possible to join Webex Meetings directly from your device. Read Join Webex Meetings from Your Cisco Webex Board, Room, or Desk Device for more information.

        Create a Copy of Whiteboards and Annotations

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        On Cisco Webex Boards you can now create copies of whiteboards and annotations. The whiteboard or annotated snapshot of a presentation is stored in the Whiteboard menu. You can go back to it and continue work on the copy as you would on any other whiteboard or snapshot. sam broadcaster free

        Digital Signage on Cisco Webex Boards and Room Series Devices

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        Digital signage allows you to display custom content, such as signage apps, internal communications, or company news. The feature is available on Cisco Webex Boards and Room Series devices.

        Simply configure the URL through Cisco Webex Control Hub and Digital signage enables your device to show any web page when it is on half-wake state.

        Read this article to learn how to set up Digital signage from Cisco Webex Control Hub or from the Web Interface of the Device.

        Send Your Whiteboards and Annotations by Email on Cisco Webex Boards

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        You can send your whiteboards and annotations by email whether you are in a Webex Teams space or not. Sending your work by email is a great way to share your whiteboards and annotations with people inside or outside your organization. The option to send your work by email has to be configured through the web interface in order to be available. Follow the steps in Configure SMTP settings in order to set up the feature. Once configured, read Use the Whiteboard and Annotate on Shared Presentations articles to find out how to send your whiteboards or annotations by email.

        Turn Off Your Video During a Meeting or a Call

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        After joining a meeting or call on your board, room or desk device, you can turn off your video if you don't want to show it. For more information, read Turn Off Your Video article.

        USB Headset Support for Room Kit, Room Kit Mini, and Room 55

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        You can connect a USB Headset, Handset, or USB Bluetooth dongle to the USB-A input on the devices. This is similar to the DX Series.

        Annotations Are Stored Into the Whiteboard Menu

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        The annotated presentations are now stored into the Whiteboard menu of the Cisco Webex Board when you’re done working on them. A snapshot of the annotated image is saved in the Whiteboard menu of the Webex Teams space as a .pdf. See Annotate on Presentations for more information.

        Improved USB-C Experience for Room Kit Mini

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        The Room Kit Mini is in USB camera mode only when it is streaming media to a computer over the USB-C port. In previous releases, it was sufficient that a computer was connected to the USB-C port. July 13, 2021 - Free Activators

        Register a Device Signal Desktop 1.1Download - Crack Key For U Cisco Webex Using API or Local Web Interface

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        You can register a device to Cisco Webex remotely, so you don’t have to be in the same room as the device. You can do this programmatically from the API or use the local web interface. In earlier releases, you had to use the onscreen setup assistant.

        To read more, see the Register a Device to Cisco Webex Using API or Local Web Interface article.

        Updates for Webex Boards

        Release ID: RoomOS 2019-06-19 002b5fa2be2

        • Support for Touch 10 controller

          • Calling

          • Edit and add favorites

          • Flashing screen for in-coming calls

        • Macros and in-room controls

        • Branding

        • Remove buttons from user interface

        Extended Support for HTTP Requests

        Release ID: RoomOS 2019-06-03 ccc122100bb

        Previously a device has been able to send arbitrary HTTP(S) Post and Put requests to an HTTP(S) server. This feature is extended to support more request types (Get, Patch, and Delete), and also to handle data that is returned from the server (response headers and body).

        To learn more, see Sending HTTP Requests from a Board, Room, or Desk Device.

        Cisco Webex Assistant for Webex Boards

        Release ID: RoomOS 2019-06-03 ccc122100bb

        The voice-driven Webex Assistant is now available on Webex Boards. With Webex Assistant enabled, anyone can walk into a conference room and use their voice to interact with a Webex Board. It helps you with tasks such as calling someone in your organization, joining a colleague’s Personal Meeting Room, controlling the volume and video display options, and much more.

        Webex Assistant is available in English.

        To learn more about Webex Assistant, see Enable Cisco Webex Assistant and Get Started with Webex Assistant.

        Infinite Whiteboard on Cisco Webex Board and Desk Devices

        Release ID: RoomOS 2019-05-13 e9e48cc1aba

        The whiteboard provides an infinite canvas where you can draw and write in all directions without never running out of space. For more information, read Use the Whiteboard on Cisco Webex Board and Use the Whiteboard on Cisco DX70 and DX80.

        Graphical Sound Mixer Available on Audio Console

        Release ID: RoomOS 2019-04-23 fbcc553c56a

        The Audio Console now has a graphical sound mixer. It has 8 user-definable parametric equalizer settings. A setting consists of up to 6 sections, each of which has its own filter type, gain, center/crossover frequency, and Q value. Each section is shown with its own color and the effect of altering any of the parameters immediately becomes visible in the graph. For more information, see Advanced Customization of Audio.

        Audio Console is available for: Codec Pro, MX700, MX800, Room 70 G2, Room 70D G2, and SX80.

        Connect to xAPI Over a WebSocket

        Release ID: RoomOS 2019-03-19 218e6106b05

        You can now connect to the xAPI over WebSocket. The communication channel over WebSocket is open both ways until it is explicitly closed. This means that the server can send data to the client as soon as the new data is available, and there is no need for re-authentication for every request. This improves speed significantly compared to HTTP. Each message contains a complete JSON document and nothing else. Many programming languages have a good library support for WebSocket and JSON-RPC.

        WebSocket is not enabled by default. Note that WebSocket is tied to HTTP and HTTP or HTTPS must be enabled before you can use WebSocket.

        For more information, see Interact with the API of a Board, Room or Desk Device over WebSocket.

        Recent Updates

        Release ID: RoomOS 2019-03-19 218e6106b05

        • 1080p support for Room Kit Mini when it is used as a USB camera.

        • The Room series devices can be configured to report the stationary ambient noise level in the room. The reported value is an A-weighted decibel value (dBA), which reflects the response of the human ear. Based on the reported noise, facility management or a building manager can search with google earth to troubleshoot the issue. All signal processing related to this feature is local and the only data that are transmitted is the calculated noise level.

        • You can now connect up to three SRG-120DH/PTZ- 12 cameras to a Codec Plus using an HDMI and an Ethernet switch.

        Hide Unsupported Files on Cisco Webex Board

        Release ID: RoomOS 2019-03-19 218e6106b05

        You can now hide the unsupported files that have been shared in a Webex Teams space when viewing them on the board.

        Fore more information, see View a File on a Board. atlas.ti license key free - Free Activators

        Webex Events Panelist Support

        Release ID: RoomOS 2019-03-19 218e6106b05

        Webex Events panelists can join events with Webex-registered devices and get a customized experience. Panelists can dial into an event directly on their device, simply by entering the password found on the email invitation. When the host starts a practice session, a banner is displayed on the panelist's device.

        For more information, see Webex Events Panelist Support.

        Edit Your Favorite Benvista PhotoZoom Pro 8.0.7 Crack Unlock Code on Room and Desk Devices

        Release ID: RoomOS 2019-03-19 218e6106b05

        You can edit your favorite contacts on Room and Desk devices in order to find them more easily. If you have marked a contact from the directory as your favorite, you can edit their name. If you have marked a video address as your favorite, you can edit that address and add a name to it to help you find the contact.

        For more information about editing favorites, see Edit Your Favorite Contacts on Room and Desk Devices.

        Cisco Webex Assistant

        Release ID: RoomOS 2019-02-22 a9172dc1ab7

        Webex Assistant is a voice-driven virtual assistant for Cisco Webex Room series devices. With Webex Assistant enabled, anyone can walk into a conference room and use their voice to interact with these devices. It helps you with tasks such as calling someone in your organization, joining a colleague’s Personal Meeting Room, controlling the volume and video display options, and much more.

        Webex Assistant is available in English.

        To learn more about Webex Assistant, see Enable Cisco Webex Assistant and Get Started with Webex Assistant.

        Add Customized Branding and Custom Notification on Room and Desk Devices

        Release ID: RoomOS 2019-02-22 a9172dc1ab7

        You can now customize the device screen and Touch 10 controller with your logo and brand image without compromising the overall user experience. In half-wake state, the screen shows a custom image and a logo. In awake state, a logo is shown in the bottom right corner of the screen.

        You can also add a short text string to the bottom left corner of the screen. This can be, for example, instructions on customized calling or information about a local support contact.

        Custom branding is not supported on the following devices:

        For more information, see Add Customized Branding and Add Custom Notification.

        Whiteboards Shared from Webex Boards and Webex Teams Visible on All Devices

        Release ID: RoomOS 2019-02-22 a9172dc1ab7

        You can now see whiteboards that are shared from Webex Boards and Webex Teams app in all meetings regardless of the type of device you have called in with. The shared whiteboard is like other shared content, so you can view it but not participate smart defrag 6.5 serial key 2020 - Activators Patch in drawing. Whiteboards from Webex Teams app are only visible in Webex Teams space meetings.

        Support for Korean Keyboard

        Release ID: RoomOS 2019-02-04 f7e76335e87

        Korean keyboard input is now supported on Touch 10 controller when the user interface language is set to Korean. The Korean keyboard is not available on the Cisco Webex Board yet.

        Support For HDCP Protected Content

        Release ID: RoomOS 2019-01-22 5008063821d

        You can configure one of the HDMI inputs of the room device to support HDCP (High-bandwidth Digital Content Protection) protected content. Then you can reuse the screen of a room device, also to show content from devices that deliver HDCP content. Examples of such devices are a Google ChromeCast, an AppleTV, or an HDTV decoder. HDCP content can only be shown locally, it cannot be shared while in a call.

        Available on the following devices:

        • Codec Plus (including Room Kit Plus and Room Kit Plus Precision 60)

        • Codec Pro (including Room Kit Pro and Room Kit Pro Precision 60)

        • Room 55 and Room 55 Dual

        • Room 70 and Room 70 G2

        For more information, see Enable HDCP Content on Room Devices.

        Advanced Customization of Audio Proshow producer free download the Audio Console Utility

        Release ID: RoomOS 2019-01-22 5008063821d

        The Audio Console utility, which is embedded in the web interface of the room device, provides a graphical interface to advanced customizable audio features. The Audio Console utility lets you define how to connect audio inputs to outputs, using simple Signal Desktop 1.1Download - Crack Key For U drag and drop techniques.

        The main features are:

        • Configure the audio system of the codec.

        • Change the default mixing, routing, and equalizers.

        • Set various input and output connector properties.

        • Configure advanced features such as local reinforcement.

        Available on the following devices:

        • SX80

        • MX700 and MX800

        • Codec Pro (including Room Kit Pro and Room Kit Pro Precision 60)

        • Room 70G2

        For more information, see Advanced Customization of Audio on Room Devices and the latest Customization guide.

        Источник: https://help.webex.com/en-us/article/6ger7db/What-s-New-in-RoomOS

        SPEC OVERVIEW

        PERFORMANCE

        CONNECTIVITY

        COOLING

        LIGHTING

        AUDIO

        ULTRA DURABLE

        GIGABYTE EXCELLENCE

        1

        Advanced Thermal Design with Enlarge Heatsink

        • 1.5mm Thick Thermal Pad

        3

        GIGABYTE Gaming GbE LAN

        • Bandwidth Management Software

        4

        Integrated I/O Shield

        • Q-Flash Plus USB Port

        5

        PCIe 4.0 x16/x4/x1 Slot

        • 1X Ultra Durable PCIe Armor

        6

        Audio Solutions

        • ALC887 Audio
        • Audio Noise Guard
        • High-End Audio Capacitors

        7

        10+2 Phases Digital VRM Solution with Lower RDs(on) MOSFETs

        8

        Supports AMD Ryzen™ Series Processors

        • Dual Channel DDR4, 4 DIMMs

        9

        Solid Pin Power Connectors

        • 24 pin ATX Power Connector
        IsoBuster Pro Crack • 8 pin CPU Power Connector

        10

        Dual PCIe 4.0 x4 M.2 Connectors

        • PCIe 4.0/3.0 x4 NVMe support
        • 1X M.2 Thermal Guard

        11

        RGB FUSION 2.0

        • Addressable LED Header*2
        • RGB LED Header*3

        GET READY FOR AMD RYZEN™ 5000 SERIES

        GIGABYTE X570 motherboards based on the AMD X570 Chipset provide full support for latest AMD Ryzen™ 5000 Series Processors. The all-new design is DikDik License key testament to GIGABYTE dedication to design quality. GIGABYTE X570 motherboards offer a rich list of features such as support for PCIe 4.0, USB Type-C™ interfaces on select boards, refined audio, high speed of Ethernet and latest standard of WIFI design, to fulfill users' performance, audio, and data transfer needs. The new, advanced power and thermal design enables users to unleash the performance on AMD Ryzen™ 5000 Series Processors, making the GIGABYTE X570 motherboards perfect for users looking to build the best AMD platform gaming system.

        AMD Ryzen™ 5000, 4000, 3000, 2000 Series Compatible

        AMD StoreMI technology

        GIGABYTE X570 motherboards maximize your PC's potential with AMD StoreMI technology. StoreMI accelerates traditional storage devices to reduce boot times and enhance the overall user experience. This easy-to-use utility combines the speed of SSDs with the high capacity of HDDs into a single drive, enhances the read/write speeds of the device to match that of SSDs, bolsters data performance for incredible value, and transforms the everyday PC to a performance driven system.

        The benefits of AMD StoreMI:

        • Making the PC experience fast, smooth and easy
        • Optimizing computer responsiveness from system boot to application launch
        • Offering SSD performance with HDD capacity at an affordable cost
        • Quickly accessing key files by automatically learning users' computing behaviors

        Detail information please refer AMD official website: https://www.amd.com/en/technologies/store-mi

        PERFORMANCE

        10*+2 Phases Digital VRM Design with Lower RDS(on) MOSFET

        Optimized for AMD 3000 series CPU

        GIGABYTE X570 motherboards use a 10*+2 phase PWM + Lower RDS(on) MOSFETs design to support the latest AMD Ryzen™ 3000-series CPUs by offering incredible precision in delivering power to the motherboard's most power- hungry and energy-sensitive components as well as delivering enhanced system performance and ultimate hardware scalability.
        * Doubled from 5 phases with current balancing.

        Benefits of Lower RDS(on) MOSFETs

        ‧ Optimized gate charge to minimize switching losses.
        ‧ Lower temperature, smaller size, better thermal characteristics.

        Advanced Thermal Design

        1. Enlarge MOSFET Heatsinks

        Enlarge heatsink surface area improves thermal performance by increasing heat dissipation surface and maintain stylish aesthetic.

        2. Thick Thermal Pad

        Improve thickness of the thermal pad to 1.5mm, gives superior heat dissipation of MOSFETs.

        Smart Chipset Fan Heatsink

        Smart Fan

        1. Provides 3 different operating modes to minimize noise and extend the fan’s longevity. Silent, Balanced and Performance modes, choose the mode that suits you the best in any download morphvox pro full crack situation.

        High Durability

        1. X570 motherboards adopt a high quality ball bearing fan which guarantees 60,000* working hours.

        2. * MTBF, A standard measurement that continuously operates under certain criteria with 90 % of confidence level.

        Pre-installed I/O Shield Armor

        Durable design and easy installation

        1. With an integrated base plate, GIGABYTE Motherboards give users a strong foundation to build their Gaming PCs.

        2. With an integrated I/O shield, building a GIGABYTE Ultra Durable PC is even easier.


        Full PCIe 4.0 Design

        GIGABYTE X570 motherboards push the envelope once again by featuring Full PCIe 4.0 Design, including PCIe 4.0 slots, PCIe 4.0 M.2 connectors and delivering highly optimized performance and flexibility demanded for power users and extreme gaming enthusiasts.

        PCIe 4.0 Hardware

        PCIe 4.0 M.2 Connectors

        XMP 4000+

        GIGABYTE X570 Motherboards feature built-in PCIe 4.0 slots, delivering superior bandwidth compared to that from previous generation technology. Performance of Graphics cards and PCIe NVMe AIC SSDs will not be limited by insufficient bandwidth.

        Signal Desktop 1.1Download - Crack Key For U PCIe 4.0 slots have higher slot signal stability and lower impedance, maximizing PCIe bandwidth while also being backwards compatible with PCIe 3.0.

        PCIe Bandwidth*

        PCIe 4.0 x16

        PCIe 3.0 x16

        Transfer speed

        * Theoretical bandwidth based on PCI Express specification

        Up to 31.5GB/s*

        Up to 15.8GB/s*

        Slot Signal Stability*

        PCIe 4.0 Slot

        PCIe 3.0 Slot

        Differential impedance

        * Based on PCIe 4.0 differential impedance specification

          Dual PCIe 4.0 M.2 Connectors

          GIGABYTE Motherboards are focused on delivering M.2 technology to enthusiasts who want to maximize their systems’ potential.

          Dual PCIe 4.0 SSD in RAID 0

          Extreme Performance with Gen3 x4 NVMe PCIe SSDs

          GIGABYTE motherboards offer the industry’s best compatibility in terms of NVMe storage for users who demand high capacity and seek the best performance. GIGABYTE‘s unique design can be configured in RAID for record speeds of up to 9534 MB/s (Sequential Read), making GIGABYTE the obvious choice for the ultimate PC.

          M.2 + M.2

          Extreme sequential Read 9534 MB/s, Sequential Write 8243 MB/s speed

          GIGABYTE M.2 Thermal Guard Design for Gen4 SSD

          GIGABYTE Ultra-Efficient M.2 Thermal Guard

          GIGABYTE provides thermal solution for M.2 SSD devices. The M.2 Thermal Guard prevents throttling and bottlenecks from high speed M.2 SSDs as it helps to dissipate heat before it becomes an issue.

          Thermal Throttling As Temperature Rises

            Support for DDR4 XMP Up to 4000MHz and Beyond*

            GIGABYTE is offering a Signal Desktop 1.1Download - Crack Key For U and proven platform that ensures proper compatibility with profiles up to 4000MHz and beyond. All users need to do to attain this performance boost is to ensure that their memory module is XMP capable and that the XMP function is activated and enabled on their GIGABYTE motherboard.

            Broad DDR4 Compatibility with Support List of 1000+ DDR4 Validated!

            GIGABYTE partners very closely with memory vendors from around the world to ensure that modules offered by popular memory brands are compatible with GIGABYTE Motherboards. GIGABYTE has verified over 1000+ different modules to ensure performance in a GIGABYTE built system.

            CONNECTIVITY

            Next Generation Connectivity

            A high-end product needs to be future-proof so your system stays up-to-date with the latest technology. GIGABYTE motherboards provide all next generation network, storage to keep you up to speed.

            Next Generation Connectivity

            GIGABYTE Gaming LAN

            HDMI 2.0

              Exclusive Realtek 8118 Gaming LAN

              High Speed Gigabit LAN with Automatic Bandwidth Allocation

              Realtek 8118 LAN is a high performance and friendly network chip for gaming players with automatic bandwidth allocation to ensure the highest network priority of the game or application. It can provide users the most comprehensive features and the fastest and smoothest Internet experience.

              Program On Top Gets Highest Priority

              Real-Time Network Monitoring

              HDMI 2.0 for 4K / 60P / 21:9 / HDCP 2.2 Support

              HDMI 2.0, which is backwards compatible with HDMI 1.4, offers 18 Gb/s of bandwidth – nearly twice that of the previous generation. This unlocks the potential for users to transfer multiple video streams, as well as a native cinematic 21:9 ratio (which most movies are shot in), offering the best visual experience for viewers.


              Note: Only Picasso and Raven Ridge APUs support displaying function.

              COOLING

              Smart Fan 5

              With Smart Fan 5 users can ensure that their gaming PC can maintain its performance while staying cool. Smart Fan 5 allows users to interchange their fan headers to reflect different thermal sensors at different locations on the motherboard. Not only that, with Smart Fan 5 more hybrid fan headers that support both PWM and Voltage mode fans have been introduced to make the motherboard more liquid cooling friendly.

              Fan / Water Pump Connectors
              Internal Temperature Sensors

              Different models have different number of fan pin headers and temperature sensors. Smart Fan 5 function may vary by model.

              Temperature Sensors

              Hybrid Fan Headers

              ■ 4 Fan / Water Pump Connectors
              ■ 6 Temperature Sensors
              ■ All Fan Pin Headers Upgraded to Hybrid Fan Headers
              ■ Interoperable Fans and Sensors
              ■ Intuitive UI for Fan Control

              FAN STOP

              Hybrid FAN Header

              Smart Fan 5 Software

              Achieve fan silence. With Fan Stop, map any fan to stop completely when temperatures drop below a specified threshold. Which fan stops, based on readings from which sensor, and at what temperature—all of it Wondershare Recoverit Ultimate 9.7.2.12 Crack With Key Latest 2021 be customized to your liking.

              Intelligent Fan Control Design

              Hybrid Fan Pin Headers

              Assume complete control over your liquid cooling setup! Smart Fan 5 receives up-to-the-second information on flow-rate and water-temperature through the Hybrid Fan Signal Desktop 1.1Download - Crack Key For U Headers, giving VyprVPN 4.1.0 Free Download with Crack you absolute mastery over your PC.
              • All Hybrid Fan Headers can automatically detect the type of cooling device whether it be fan or pump with different PWM or Voltage mode.

              New Smart Fan 5 Software

              Choose from different modes, Quiet to Full Speed, to match your system usage preferences.
              For each fan or pump, you can use the intuitive fan curve to define trigger thresholds and corresponding fan speeds.

              LIGHTING

              RGB FUSION 2.0

              RGB Fusion 2.0 offers users the option to control onboard RGB and external RGB / Addressable LED light strips for their PC. With external Addressable LED strips*, where each LED is digitally addressable, users can experience even more patterns, styles, and illuminations.

              GIGABYTE Motherboards support 5v Addressable LED lighting strips and up to 1000 LED lights. RGB Fusion 2.0 with Addressable LEDs comes with new patterns and various speed settings with more to come.

              With full RGB support and a redesigned RGB Fusion 2.0 application, the user has complete control over the LEDs which surround the motherboard.

              RGB Fusion 2.0 Ready

              RGB Fusion 2.0 Software

              RGB Fusion APP

              With a dazzling array of products supported, RGB Fusion 2.0 is the software that brings it Office - Crack All Windows/Mac OS Software Full Version all together, letting your accessories synchronize to the same beat. Customize all your LEDs how you like — have them match, dazzle and impress. airserver 5.5.9 crack Learn more about RGB Fusion 2.0

              With an integrated intuitive user interface, the RGB Fusion 2.0 provides Signal Desktop 1.1Download - Crack Key For U a better solution for customizing the lighting effects across all supported devices. From motherboards, graphics cards to the peripheral products, you can personalize your gaming rig with your own style and show off your build by sharing the profiles. In addition, the new gaming mode makes the lighting effects interactive with selected games to bring you the most immersive gaming experience.

              Sync with one click

              Individual control as you wish

              GIGABYTE RGB Fusion APP

              Don't just make your PC shine, make it a work of art that friends will envy. With the GIGABYTE RGB Fusion mobile app users can watch as they control the lighting within their gaming PC. This gives users ease of access as they try and adjust colors and speeds for different modes, all IDM Build 2 Full Crack v6.39 + Serial Key Latest Download 2021 this can be achieved away from the keyboard and monitor of their PC.

              AUDIO

              High-End Audio Capacitors

              GIGABYTE motherboards use high-end audio capacitors. These high quality capacitors help deliver high resolution and high fidelity audio to provide the most realistic sound effects for gamers.

              Audio Noise Guard

              GIGABYTE motherboards feature an audio noise guard that essentially separates the board’s sensitive analog audio components from potential noise pollution at the PCB level.

              ULTRA DURABLE

              Q-Flash Plus

              Update the BIOS easily without installing the CPU, memory and graphics card.

              Источник: https://www.gigabyte.com/Motherboard/X570-GAMING-X-rev-11
              8 10 [32-bit

              Notice: Undefined variable: z_bot in /sites/travelafter.us/crack-key-for/signal-desktop-11download-crack-key-for-u.php on line 109

              Notice: Undefined variable: z_empty in /sites/travelafter.us/crack-key-for/signal-desktop-11download-crack-key-for-u.php on line 109

              Posted inCrack Key For

              1 thoughts on “Signal Desktop 1.1Download - Crack Key For U”

              Leave a Reply

              Your email address will not be published. Required fields are marked *

              Proudly powered by WordPress | Theme: Futurio